Filter
Top Products
Impinger II – Digital Advantage Ops Manual –Dom & Int’l
4
UTILITY SPECIFICATIONS REQUIRED – ELECTRIC
Model Energy Power Voltage Current Phase Hz
Recommended
Electrical Specification
Recommended
Circuit Breaker
Supply Wire
Size 90° C
Agency Listings
1130/60 Electric 10kW 120/208 VAC 48 Amps 1 60 Hz 4 Wires, 2 Pole + N + G 2 Pole, 50 Amp 6 AWG UL, CSA, NSF
1131/61 Electric 10kW 120/240 VAC 42 Amps 1 60 Hz 4 Wires, 2 Pole + N + G 2 Pole, 50 Amp 8 AWG UL, CSA, NSF
1132/62 Electric 10kW 120/208 VAC 28 Amps 3 60 Hz 5 Wires, 3 Pole + N + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1133/63 Electric 10kW 120/240 VAC 25 Amps 3 60 Hz 5 Wires, 3 Pole + N + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1130-080-A Electric 10kW 120/208 VAC 48 Amps 1 60 Hz 4 Wires, 2 Pole + N + G 2 Pole, 50 Amp 6 AWG UL, CSA, NSF
1131/61-080-A Electric 10kW 120/240 VAC 42 Amps 1 60 Hz 4 Wires, 2 Pole + N + G 2 Pole, 50 Amp 8 AWG UL, CSA, NSF
1132/62-080-A Electric 10kW 120/208 VAC 28 Amps 3 60 Hz 5 Wires, 3 Pole + N + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1133-080-A Electric 10kW 120/240 VAC 25 Amps 3 60 Hz 5 Wires, 3 Pole + N + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1134 Electric 10kW 380Y/208 VAC 15 Amps 3 50 Hz 5 Wires, 3 Pole + N + G
5 x 2.5mm
2
NSF
1135 Electric 10kW 415Y/240 VAC 14 Amps 3 50 Hz 5 Wires, 3 Pole + N + G
5 x 2.5mm
2
NSF
1136 Electric 10kW 240 VAC 42 Amps 1 50 Hz 3 Wires, 1 Pole + N + G
3 x 10.0mm
2
NSF
1151 Electric 10kW 200VAC 29 Amps 3 60 Hz 4 Wires, 3 Pole + G
3 x 4.0mm
2
NSF
*1164-XXX-E Electric 10kW 400/230 VAC 15 Amps 3 50 Hz 5 Wires, 3 Pole + N + G 3 Pole, 32 Amp
5 x 2.5mm
2
CE, NSF
1130-000-A Electric 10kW 208 VAC 48 Amps 1 60 Hz 3 Wires, 2 Pole + G 2 Pole, 50 Amp 6 AWG UL, CSA, NSF
1131-000-A Electric 10kW 240 VAC 42 Amps 1 60 Hz 3 Wires, 2 Pole + G 2 Pole, 50 Amp 8 AWG UL, CSA, NSF
1132-000-A Electric 10kW 208 VAC 28 Amps 3 60 Hz 4 Wires, 3 Pole + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1133-000-A Electric 10kW 240 VAC 25 Amps 3 60 Hz 4 Wires, 3 Pole + G 3 Pole, 30 Amp 10 AWG UL, CSA, NSF
1130-08H-A Electric 12kW 208 VAC 63 Amps 1 60 Hz 3 Wires, 2 Pole + G 2 Pole, 90 Amp 4 AWG UL, cUL, NSF
1131-08H-A Electric 12kW 240 VAC 54 Amps 1 60 Hz 3 Wires, 2 Pole + G 2 Pole, 50 Amp 6 AWG UL, cUL, NSF
1132-08H-A Electric 12kW 208 VAC 36 Amps 3 60 Hz 4 Wires, 3 Pole + G 3 Pole, 70 Amp 8 AWG UL, cUL, NSF
1133-08H-A Electric 12kW 240 VAC 31 Amps 3 60 Hz 4 Wires, 3 Pole + G 3 Pole, 40 Amp 10 AWG UL, cUL, NSF
* REF MODEL NUMBER KEY
UTILITY SPECIFICATIONS REQUIRED – GAS
Model Energy Power Voltage Current Phase Hz
Recommended
Electrical Specification
Recommended
Circuit Breaker
Gas Agency Listings
1116 Nat. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp 40,000 BTU at 7 inches, H
2
O column** CSA, NSF
1117 L.P. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp 40,000 BTU at 11 inches, H
2
O column** CSA, NSF
1154 Nat. Gas 45 MJ 240 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 45 MJ/HR at 1.7 kPa, H
2
O column** AGA*, NSF
1155 L.P. Gas 45 MJ 240 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 45 MJ/HR at 2.73 kPa, H
2
O column** AGA*, NSF
1156 Town 45 MJ 240 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 45 MJ/HR at 3.6 kPa, H
2
O column** AGA*, NSF
1157 Nat. Gas 40,000 BTU 220/240 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 40,000 BTU at 7 inches, H
2
O column** NSF
1158 L.P. Gas 40,000 BTU 220/240 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 40,000 BTU at 11 inches, H
2
O column** NSF
*1154-XXX-E Nat. Gas 12kW 230 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 1 Pole, 16 Amp 12 kW/HR at 17.4 mB, H
2
O column** CE, NSF
*1155-XXX-E L.P. Gas 12kW 230 VAC 2 Amps 1 50 Hz 3 Wires, 1 Pole + N + G 1 Pole, 16 Amp
12 kW/HR at 27.4 mB, H
2
O column**
CE, NSF
1116-000-A Nat. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp
40,000 BTU at 7 inches, H
2
O column**
CSA, NSF
1117-000-A L.P. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp
40,000 BTU at 11 inches, H
2
O column**
CSA, NSF
1116-080-A Nat. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp
40,000 BTU at 7 inches, H
2
O column**
CSA, NSF
1117-080-A L.P. Gas 40,000 BTU 120 VAC 7 Amps 1 60 Hz 3 Wires, 1 Pole + N + G 1 Pole, 15 Amp
40,000 BTU at 11 inches, H
2
O column**
CSA, NSF
GAS PRESSURE CONVERSION CHART
Inches of
Water Column
KPa m-Bar
Millimeters of
Water Column
3.5 0.87 8.70 88.9
4.5 1.12 11.2 114.3
7 1.74 17.40 177.8
10 2.48 24.87 254.0
10.5 2.61 26.11 266.7
11 2.73 27.36 279.4
14 3.48 34.81 355.6
14.5 3.61 36.05 368.3
* AGA – Australia Gas Association (See 1154 & 1155 above)
** NOTE: For proper operation, the gas valve requires a nominal inlet pressure of 7 inches of H
2
O for natural gas and 11 inches of H
2
O column
for L.P. gas. A minimum inlet pressure of 1.0 inch of H
2
O column above the manifold setting (NAT. manifold 3.5” H
2
O, L.P. manifold 10” H
2
O)
must be maintained with no pressure drop from the no load to full load condition. The maximum inlet pressure must be maintained at or below
½ PSIG (14.5 inches H
2
O column). Refer to the chart on the left for pressure conversions.
Electrical Supply for Australia:
Single Phase: 240 VAC, 50 Hz / 20 Amp; one neutral & one earth/ground.
Three Phase: 240/415 VAC / 20 Amp; three active, one neutral & one earth/ground.
All ovens require separate service and dedicated neutral.
NOTE: Do not install the (these) oven(s) in any area with an ambient temperature in excess of 95°F / 35° C. Doing so will cause damage to the
unit.