Filter
Top Products
STORAGE COMPARTMENT SHELVING
Loading Tips and Suggesons
Your product is equipped with a canlever shelf system to pro-
vide you with maximum adjustability and customizaon opons
through the purchase of aermarket shelving.
The basic cabinet comes with 3 glass shelves which can be
posioned anywhere in the cabinet. The glass half shelf allows
storage of tall boles or opened wine boles on the shelf below.
(See Figure 15). The xed wooden bole cradle at the boom of
the cabinet will hold 6 boles of wine. The wooden, boom bot-
tle cradle may be removed for storing “jug” wines. Just remove
the two (2) screws that secure the cradle to the cabinet oor.
The boles or cans on the top shelf directly under the light will
be exposed to a slightly higher temperature when the light is on.
Posion your product accordingly and REMEMBER TO TURN OFF
THE LIGHT WHEN IT IS NO LONGER NEEDED.
12
Glass
shelves
Wine bole
cradle
Tall bole
storage area
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the unit. Grasp the shelf front with both
hands, rotate the front upward and li out. (See Figure 16). To
install a shelf insert the shelf in the unit and insert the hooks into
the shelf support slots and drop the shelf down so the hooks
drop over the boom of the slots.
Rear tang
(hook) on
shelf
Shelf support
slot
Installed shelf
tang
Grasp the shelf on
the wood front
Make sure the shelf is secure
before loading the shelf.
NOTE
Figure 15
Figure 16