Filter
Top Products
10
For further assistance, call 1-800-688-9900 U.S.A., 1-800-688-2002 Canada or www.maytag.com
To reinstall a crisper drawer:
➢ Align the drawer in the tracks.
➢ Lift the drawer front and slide in.
For best results, keep the crispers tightly
closed.
To remove the Crisper Top (select
models):
➢ Remove drawers as instructed above.
➢ Place hand beneath frame to push up
glass from underneath. Lift glass out.
➢ Lift frame from refrigerator liner rails.
To reinstall the Crisper Top (select
models):
➢ Repeat above instructions in reverse
order.
If door doesn’t open far enough to
remove drawers:
➢ Remove drawer furthest from hinge
side of cabinet.
➢ Remove glass as instructed previously.
➢ Lift center divider from frame. Slide
existing drawer away from hinge side
of cabinet and remove.
EGG CRADLE (Select Models)
Your refrigerator may come equipped
with an Egg Cradle (style may vary). It
can be removed to be washed or carried
to a work area.
MULTI-USE RACK
(Select Models)
The Multi-Use Rack
(select models) pro-
vides a place for stor-
ing wine horizontally.
The rack also holds canned beverages or
an egg carton. Position the rack on the
side of a refrigerator shelf. Note: The
Multi-Use Rack cannot be positioned on
an Elevator™ Shelf.
WIRE BASKET(Select Models)
To remove and install basket:
➢ To remove
basket, pull
basket out to
full exten-
sion. Tilt up
front of basket and pull straight out.
➢ To install, insert basket into refrigera-
tor liner rails and push back into place.
LOWER BASKET DIVIDER
(Select Models)
The Lower Basket Divider allows the
basket area to be organized into
sections.
To remove divider:
➢ Pull divider
straight up.
To reinstall divider:
➢ Hook top corners of divider over top
horizontal basket rungs.
Freezer door storage
FIXED DOOR SHELF
(Select Models)
The Fixed Door Shelf provides conven-
ient storage for frozen food items in freez-
er door.
To remove door shelf:
➢ Lift assembly from side liner tabs and
pull out.
To reinstall door shelf:
➢ Fit ends of shelf assembly on liner
tabs and slide down.
TILT-OUT BIN (Select Models)
The Tilt-Out Bin
in the freezer
door tilts for-
ward for easy
access to stored
items.
Freezer compartment
shelves and baskets
WIRE ICE SERVICE RACK
(Select Models)
To install:
➢ Position wire
rack against the
freezer wall,
above plastic
supports (A).
➢ Slide the rack down over the plastic
supports until the rear loops are firmly
seated.
To remove:
➢ Perform above steps in reverse order.
FIXED OR SLIDE-OUT
FREEZER SHELF
(Select Models)
To remove:
➢ Pull shelf out to full extension.
➢ Tilt up front of shelf and pull straight out.
To reinstall:
➢ Insert shelf onto freezer liner rails and
push to back of compartment.
PULLOUT DRAWER
BASKETS
(Select Models)
(Door assembly
of drawer
removed from
illustration for
visual clarity.)
To remove and replace baskets:
➢ See page 5 for basket removal and
replacement instructions.
To prevent accidental child entrap-
ment or suffocation risk, DO NOT
remove the divider in the top freezer
basket.
DANGER
looking inside
A