Filter
Top Products
19
PROBLEM POSSIBLE CAUSES WHAT TO DO
Refrigerator is leaking Plastic tubing was used to complete water Use copper tubing for installation. Plastic is less durable and
water connection. can cause leakage.
Ice forms in inlet tube to Improper water valve was installed. Check water connection procedure in the Installation
ice maker Instructions. Self-piercing and
3
⁄16" saddle valves cause low
water pressure and may clog the line over time.
Water pressure is low. Water pressure must be between 20 to 100 pounds per square
inch to function properly.
Water flow is slower than Freezer temperature is too high. See page 8. Freezer temperature should be approximately
normal 0° F (-18° C).
Water pressure is low. Water pressure must be between 20 to 100 pounds per square
inch to function properly.
Improper water valve was installed. Check water connection procedure in the Installation
Instructions. Self-piercing and
3
⁄16" saddle valves cause low
water pressure and may clog the line over time.
Water droplets form on Check gaskets for proper seal. Clean, if necessary. See page 15.
outside of refrigerator
Humidity levels are high. Normal during times of high humidity.
Controls require adjustment. See page 8.
Water droplets form on Humidity levels are high or door has been Minimize door openings.
inside of refrigerator been opened frequently.
Check gaskets for proper seal. Clean, if necessary. See page 15.
ICEMOISTURE
BEFORE YOU CALL FOR SERVICE
, CONT.