Filter
Top Products
B–14 16023415 ©2004 Maytag Services
Use and Care - Model MGR6875AD*
8
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the number pads to enter time or temperature.
• Or, press the Autoset pad to enter temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the Upper Oven CANCEL
and Favorite pads for three seconds.
• 12 Hr flashes in the display.
2. Press the Autoset pad to select 24 Hr;
press again to select 12 Hr.
3. Set the time of day following the direc-
tions in the To set the Clock section.
Oven Cooking
Control Panel
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Clean Use to set self-clean cycle.
D Keep Warm Use to keep cooked food warm in oven.
E Oven Light Use to turn the oven light on or off.
F Number Pads Use to set time and temperature.
G CANCEL Cancels all operations except timer
and clock.
H Convect Roast Use for convection roasting.
I Convect Bake Use for convection baking.
J Timer 1 or 2 Sets timer.
K Clock Use to set time-of-day clock.
L Cook & Hold Bakes for a preset time, then keeps food
warm for 1 hour.
M Delay Programs the oven to start baking or
cleaning at a later time.
N Favorite Use to save a specific Cook & Hold
procedure.
O Autoset Use to quickly set temperatures.
A B C D E F
G H I J K L M N O
Note: Four seconds after entering the number, the time or
temperature will automatically be entered. If more than 30
seconds elapse between touching a function pad and the
number pads, the function will be canceled and the display
will return to the previous display.
To set the Clock:
1. Press the Clock pad.
• The time of day flashes in the display.
• Colon flashes in the display.
2. Press the appropriate number pads to set the time of day.
3. Press the Clock pad again or wait four seconds.
• The colon will remain on.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.
To recall the time of day when another time function is
showing, press the Clock pad.
To cancel the Clock display:
If you do not want the time of day to display:
Press and hold the Upper Oven CANCEL and
Clock pads for three seconds. The time of day will
disappear from the display.
When the clock display is canceled, press the
Clock pad to briefly display the time of day.