Filter
Top Products
One or more of sensors 1 to IS will
flash.
The number of flashing sensors
indicates the percentage of the
operating time which has already been
used up.
Sensor 1 ....................25%
Sensor 1 and 2 ...............50%
Sensor 1 to 3 .................75%
Sensor 1 to IS...............100%
^
When you take your finger off the
Grease filter sensor [, the current
fan setting will show.
The number of operating hours used
remains in the memory, even when the
cooker hood is switched off or there is a
power cut.
Charcoal filter operating hours
counter
(only for recirculation mode)
On delivery, the operating hours
counter for the charcoal filter is
deactivated.
For recirculation mode, the operating
hours counter needs to be set to suit
the type of cooking you do.
The Charcoal filter sensor will light
up after the cooker hood has operated
for the number of hours set.
^
The charcoal filter must then be
replaced with a new one.
Afterwards, the operating hours counter
will need to be reset (see "Cleaning and
care").
Activating and altering the charcoal
filter operating hours counter
^
Touch the On/Off sensor s to switch
the fan off.
^
Touch the Run-on sensor ¢ and the
Charcoal filter sensor at the same
time.
The Grease filter sensor and one of
the fan power level sensors 1 to IS will
flash.
Sensors 1 to IS indicate the time set:
Sensor 1 ................120hours
Sensor 2 ................ 180hours
Sensor 3 ................240hours
Sensor IS ............. Deactivated
^ Touch the relevant number to select
the time you want.
^ Confirm the selection by touching the
Charcoal filter sensor
.
All the indicator lights will go out.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Operation (Automatic and manual modes)
24