Filter
Top Products
a 3 protective sheets
for use when fitting the tower.
b 1 exhaust socket for exhaust
ducting C 150 mm.
c 1 reducing collar
for exhaust ducting C 125 mm.
d 1 non-return valve
for fitting into the exhaust connection
on the motor unit (not for
recirculation mode)
e Telescopic wall bracket for
securing the cooker hood to the wall.
f Con@ctivity 2.0 stick
for retro-fitting the hob
g Conversion kit for recirculation
mode
contains directional unit and flexible
aluminium ducting with clips (this kit
has to be purchased as an optional
extra - see Technical Data).
6 screws5x60mmand
6 x plugs8x50mm
for securing the wall bracket.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2xM6self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
35