Filter
Top Products
^
Touch the IS sensor to activate
Con|ctivity 2.0.
While it is searching for the radio
connection, the 2 sensor will light up
and 3 will flash.
^
Meanwhile you can start the
activation process for the hob.
Activating the Con|ctivity 2.0
function on the hob
^
While the cooker hood is searching
for the radio connection, start the
activation process for the hob.
For further information please refer to
the operating instructions for the hob.
The radio connection is established
when sensors 2 and 3 on the cooker
hood are constantly lit up.
^ Confirm activation of the cooker hood
by touching the Run-on option sensor
¢. All the indicator lights will go out.
^ Confirm activation of the hob.
The Con|ctivity 2.0 function is now
ready for use.
The function will not be activated unless
it is confirmed within 4 minutes.
Checking activation
To check whether the Con|ctivity 2.0
function is activated on the cooker
hood:
^
Switch off the fan and the hob
lighting.
^
Touch the Run-on sensor ¢ for
approx. 10 seconds until the 1 sensor
lights up.
^
Press in turn
–
the 1 sensor,
–
then the IS sensor,
– then the lighting sensor I.
If the Con|ctivity 2.0 function is
activated, 2 and 3 will light up
constantly.
If the Con|ctivity 2.0 function is not
activated, 2 and 3 will flash at the same
time.
^ Touch the Run-on sensor ¢ to exit
the check. All the indicator lights will
go out.
^
To check whether the hob is
activated, please refer to the
operating instructions for the hob.
If communication cannot be
established even although the cooker
hood and the hob have been
activated, both appliances must be
deactivated and then activated
again.
Activating the Con|ctivity 2.0 function
41