Filter
Top Products
^ Whilst counterholding adjusting bolts
h with a screwdriver, tighten nuts c
on the appliance door with ring
spanner j.
^ Cover strip k must be completely
hidden in the niche, and must not
protrude.
^ Drill holes l in the furniture door and
fit screws m.
Make sure the two metal edges are
aligned (Symbol II).
^ Close both doors.
Aligning the door
–
Depth adjustment (Z)
^
Loosen screws i at the top of the
appliance door, and screw n at the
bottom of the fixing bracket. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the housing unit.
Building in the appliance
69