Filter
Top Products
Modes of operation
13
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication
fac
ility which enables the automatic
operation of the cooker hood
depending on the operational state of
the hob.
To make use of the communication
facili
ty the hob must be fitted with a
Con@ctivity 2.0 Stick .
Refer to the installation instructions for
the Con
@ctivity 2.0 Stick to check
whether it is compatible with your hob.
To use the Con@ctivity 2.0 function, a
wireless connection must be
established between the hob and the
cooker hood (see "Activating
Con@ctivity 2.0").
The hob transmits information about its
oper
ational status via a radio signal to
the cooker hood.
– When the hob is switched on, the
hob lighting comes on independently
and then aft
er a short time the fan
also comes on.
– During cooking the cooker hood
aut
omatically sets the power level
according to the number of cooking
zones in operation and their power
levels.
– After switching the hob off the fan
and the hob lighting will switch off
aut
omatically after a specified period
of time.
See "Operation" for detailed
information about this function.