Filter
Top Products
Activating Con@ctivity 2.0
34
Installing the Con@ctivity 2.0
S
tick
In order to use the Con@ctivity 2.0
fun
ction, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Please
read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the
cooker hood and the hob
before Con@ctivity 2.0 can be used.
Both appliances must be installed and
oper
ational.
You only need to carry out the
activati
on procedure once. If the
appliances are disconnected from the
electricity supply, during a power cut
for example, they will still remain
activated.
To establish the wireless connection,
the coo
ker hood and hob must be
activated at the same time.
First activate the cooker hood, then the
hob.
Activating the cooker hood
Switch off the fan, hob lighting and
hob.
T
ouch the run-on option control
for approx. 10 seconds, until 1 lights
up in the power level display.
Th
en touch in turn,
– the 1 co
ntrol,
– then the IS co
ntrol,
– then the lighting control .
If Con@ctivity 2.0 has not been
activated, the indicators for levels 2 and
3 will flash at the same time.
T
o activate Con@ctivity 2.0 touch the
IS control.
2 will light up constantly and 3 will
flash. The sea
rch for a signal starts.
Mean
while, start the activation of the
hob.