Filter
Top Products
Cleaning and care
26
Cleaning the grease filters in the
dishwasher
Pla
ce the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
Use a p
roprietary household
dishwasher detergent.
Select a dishwasher pr
ogramme with
a wash temperature between 50°C
and 65°C.
Depending on the cleaning agent
used, cleani
ng the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
After cleaning
Aft
er cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
When r
emoving the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
Replace
the grease filters, making
sure that the locking clips are facing
down towards the hob.
If a gr
ease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hou
rs counter
After cleaning, the operating hours
counter needs to be re-set.
Whilst the fan is switched on, pr
ess
the Grease filter control for
approx. 3 seconds, until only the 1 is
flashing.
The Grease filter symbol goes out.
If you want to clean the grease filters
befor
e the operating hours counter has
reached its maximum,
T
ouch the Grease filter control for
approx. 6 seconds, until only the 1 is
flashing.