Filter
Top Products
Operation (Automatic and Manual modes)
23
Filter saturation indicator
The number of hours the hood has
been in oper
ation is stored in appliance
memory.
The filter saturation indicators show
when the filt
ers need to be cleaned or
changed by lighting up the grease filter
symbol or OdorFree Charcoal Filter
symbol . Additional information on
cleaning and changing the filters and
resetting the filter saturation counters
can be found under "Cleaning and
care."
Adjusting the filter saturation indica‐
t
or for the grease filter
You can set the filter saturation indica‐
t
or to suit your cooking habits.
The factory default setting is a cleaning
int
erval of 30 hours.
– Select a shorter time (20 hours) if you
oft
en fry foods.
– We also recommend a shorter clean‐
ing interval if you only cook occa‐
sionally. This will prevent grease
buildup from hardening and making
cleaning more difficult.
– Select a longer cleaning interval of 40
or 50
hours if you use very little fat
when cooking.
Press the On/Off button to turn off
the fan.
T
ap the delayed shut down button
and the grease filter button at the
same time.
The grease filter symbol and one of
the fan power level indic
ators will flash.
The indicators 1 t
o IS show the current
time setting:
Indicator 1 ...............................
20 hours
Indicator 2................................
30 hours
Indicator 3................................
40 hours
Indicator IS ..............................
50 hours
T
ap the relevant button to select the
time required.
Co
nfirm your choice by touching the
grease filter button .
All the indicator lights will go out.
If the setting is not confirmed within 4
minu
tes, the hood automatically reverts
to the old setting.