Filter
Top Products
Cleaning and care
28
T
o remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the grease filters by hand
Cle
an the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
t
o the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degr
easer sprays
– Oven sprays
Cleaning the grease filters in the
dishwasher
Place
the filters as upright or inclined
as possible in the lower basket. En‐
sure that the spray arm is not ob‐
structed.
Use a common household dishwash‐
er det
ergent.
Selec
t a program with a wash tem‐
perature between 122°F (50°C) and
149°F (65°C). In a Miele dishwasher
use the "Normal" program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the filters
in any way.
After cleaning
After cleaning, leave the filters on an
absorbent surface to dry.
When r
emoving the filters for clean‐
ing, also clean off any accessible oil
or fat buildup from the housing. Do‐
ing so will prevent a fire hazard.
Rein
stall the grease filters. When in‐
serting the filters, make sure that the
locking clip is facing down.