Filter
Top Products
Cleaning and care
29
If the filt
ers have been installed incor‐
rectly, you can insert a small screw‐
driver into the slit to disengage the
locking clip.
Resetting the filter saturation indica‐
t
or for the grease filter
Once cleaning is complete, the filter
saturation indicator must be reset.
While
the fan is turned on, press the
grease filter button for approx. 3
seconds, until only the 1 is flashing.
The grease filter symbol goes out.
When cleaning the grease filters before
the full oper
ating time has elapsed:
P
ress the grease filter button for
approx. 6 seconds, until only the 1 is
flashing.
OdorFree Charcoal Filter
If the hood is equipped for recirculation,
an OdorF
ree Charcoal Filter must be in‐
stalled in addition to the grease filters.
This filter is designed to absorb odor-
causing agents and is mounted in the
canopy above the grease filters.
OdorFree Charcoal Filters are available
from your Miele dealer or from Miele.
See "Technical data" for the type and
reference number.
Installing/replacing the OdorFree
Char
coal Filter
T
o install or replace the OdorFree
Charcoal Filter, the grease filters must
first be removed as described above.
Remove the OdorFree Charcoal Filter
from its packaging.
P
ress the OdorFree Charcoal Filter in‐
to the frame.
Rein
stall the grease filters.
When insta
lling the filter for the first
time, activate the filter saturation
counter (see "Operation").