Filter
Top Products
Installation
35
8
5
/
8
"
220 mm
8
5
/
8
"
220 mm
dai3435aus
Dr
aw two intersecting lines on the
ceiling.
F
or vented mode:
– Place a section of the exhaust duct‐
ing in the ceiling and feed it down
thr
ough the cross-sectional area as
illustrated. Exhaust ducting of ap‐
prox. 27 ⁹/₁₆" (700 mm) length is re‐
quired between the ceiling and the
hood exhaust socket.
– Secure the exhaust ducting to the ex‐
hau
st socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
Place
the power cord and guide it
through the ceiling in the area shown.
A power cord approx. 27 ⁹/₁₆"
(700 mm) in length is required be‐
tween the ceiling and the hood con‐
nectors.