Filter
Top Products
Cleaning and care
26
WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR IN‐
JURY TO PERSONS, OBSERVE THE
FOLLOWING:
Befor
e cleaning or servicing the
hood, disconnect it from the power
supply, see "IMPORTANT SAFETY
INSTRUCTIONS".
Stainless steel housing
General
The surfaces and control buttons are
susce
ptible to scratching and chip‐
ping.
Observe the following cleaning in‐
structions.
Cle
an all surfaces and control but‐
tons using warm water and liquid
dish soap only, applying the mixture
with a sponge cloth.
Make sure that no water gets into
the in
terior of the hood.
Only use a damp cloth to clean the
ho
od, especially in the control panel
area.
Aft
er cleaning, dry the surfaces with a
soft cloth.
Avoid the following:
– Cleaners containing soda, acid or
chloride, or cleaners containing sol‐
vents
– Abrasive cleaners such as scouring
powder, scouring liquid, abrasive
sponges such as pot scourers, or
used sponges that still contain resi‐
dues from abrasive cleaners
Special instructions for stainless
st
eel surfaces
(does not apply to control buttons)
S
tainless steel surfaces can also be
cleaned using a non-abrasive stain‐
less steel cleaner, available from
Miele.
T
o prevent the surfaces from quickly
becoming dirty again, we recom‐
mend treating them with a stainless
steel care conditioner.
Apply sparingly over the entire area
using a soft cloth.
Special instructions for RAL color
finish housing
(special order)
Obser
ve the general cleaning instruc‐
tions contained in this chapter.
Minor scratches on the surface are in‐
evitable when cleaning the housing.
Depending on the lighting in the kitch‐
en, this may negatively affect the ap‐
plia
nce's appearance.