Filter
Top Products
Before using for the first time
,
The oven must not be operated
until it has been correctly installed in
its housing unit.
^
Press and release the function and
temperature selectors if they are
retracted.
The time of day can only be changed
when the function selector is at 0.
^
On models with a clock/timer, enter
the correct time of day.
Setting the time of day for the
first time
The time of day is shown in 24 hour
clock format.
i2
:
00
After connecting the oven to the
electricity supply, i2:00 will flash in the
display.
The time of day is set in segments: first
the hours, then the minutes.
^ Press OK.
i2:00 will light up constantly and + will
flash.
^ Whilst + is flashing, press OK.
The hours will flash.
^ Use V or W to set the hours.
^
Press OK.
The hours are saved and the minutes
will flash.
^
Use V or W to set the minutes.
^
Press OK.
The time of day is now saved.
The time of day can be displayed in
12 hour format by setting P2in the
settings menu to status i2 (see
"Clock/timer – Changing settings").
Using for the first time
30