Filter
Top Products
^ Slide the cover strip tabs a into
position.
^
Screw the mounting bracket d onto
the pre-drilled holes in the appliance
door using the hex screw e.
Securely attach a second pair of
mounting brackets d in the handle
area of the door using the pre-drilled
holes in the appliance door.
^
Slide the appliance two-thirds of the
way into the cabinet space.
Make sure that the power cable does
not get caught in the process.
Tip for sliding the appliance:
Tie a piece of string around the plug to
"extend" the length of the power cable.
Then pull the cable through the cabinet
unit by the opposite end of the string. It
will then be easier to plug in the
appliance once it has been installed.
For 5/8" (16 mm) cabinet walls only:
^
Clip the spacers b and c onto the
right side of the hinges.
^
Open both appliance doors.
Installing the appliance
86