Filter
Top Products
^ Tighten the nuts c on each of the
appliance doors using a box-end
wrench j while holding the
alignment bolts c in place using a
screwdriver.
^ The cover strip k must be
completely hidden in cabinet space.
It must not protrude.
^ Drill the mounting holes l in the
cabinet door and fasten the screws
m. Make sure the two metal edges
are aligned flush with one another
(Symbol II).
^ Close both doors.
Adjusting the position of the door
–
Depths adjustments (Z)
^
Loosen the screws i at the top of
the appliance door and the screw n
on the mounting bracket the bottom.
Create a gap of 0,1'' (2 mm) between
the cabinet door and the cabinet
body by moving the cabinet door.
Installing the appliance
95