Filter
Top Products
Installing the appliance
^
Slide the appliance into the cabinet
space until the covers of the
mounting brackets touch the front
edge of the cabinet side wall.
–
n For 5/8" (16 mm) walls:
The spacers should touch the front
edge at the top and bottom of the
cabinet side wall.
–
o For 3/4" (19 mm) walls:
The front edges of the top and
bottom hinges should be flush with
the front edge of the cabinet side
wall.
^
Check again to see whether the top
and bottom mounting brackets touch
the front edge of the cabinet side
wall.
This will help maintain a 1,6'' (42 mm)
distance from front edge of the
cabinet side walls along the entire
perimeter.
On cabinets with door fittings (e.g.
nubs, seals etc.) the dimension of
these parts must be taken into account
to ensure that there is a gap of 1,6'' (42
mm) on all sides of the appliance.
^ Pull the appliance forwards by the
appropriate distance.
The hinges and covers will now
protrude by a distance equal to the
depth of the door fitting.
Tip: Remove the door fittings. A flush
alignment with the surrounding cabinet
doors is still ensured.
^
p Align the appliance on both sides
until it stands straight by adjusting
the feet using the wrench provided.
If a gap of 1,6'' (42 mm) is not
maintained between the perimeter of
the appliance housing and the front
edge of the cabinet side walls, the
door may not shut properly.
This can cause ice buildup,
condensation accumulation and
other malfunctions. These can all
lead to increased energy
consumption.
Installing the appliance
88