Filter
Top Products
^
Tighten all screws again.
^ Replace each of the top covers o,
and click it into place.
^
Replace the side covers p, making
sure you hear them click into place.
The following confirm that the
appliance has been correctly
installed:
–
The doors close properly.
–
The doors do not touch the cabinet
body.
–
The seals at the top corner of the
handle side fit tightly.
^
To check for proper installation, turn
on a flashlight, place it in the
appliance and close the doors.
Switch the lights off in the room. If
you see any light shining out on the
sides of the appliance, check the
installation steps again separately.
Installing the appliance
96