Filter
Top Products
Mounting the cabinet doors.
The cabinet door must have a minimum
thickness of 5/8" (16 mm) and a
maximum thickness of 3/4" (19 mm).
The following gap sizes must be
maintained:
–
The gap between the cabinet door
and the unit door above must be at
least 0,1'' (3 mm).
–
The vertical gap between cabinet
doors should also be about 0,1'' (3
mm). The exact size will vary
depending on the radius of the
cabinet door edges.
When installing the appliance in an
array of kitchen units, the top edge of
the cabinet door must be at the same
height as the cabinet doors of the
adjacent units.
The cabinet door must be mounted so
that it is level and not under any stress.
Mounting doors that exceed the
maximum allowable weight can
damage the hinges. This may then
lead to functional problems with the
appliance.
Before mounting furniture doors, make
sure that each door does not exceed
the maximum allowable weight:
Appliance Max.
weight
of
upper
door in
Ib (kg)
Max.
weight
of lower
door in
Ib (kg)
KFNS 37432 iD 44 (20) 26 (12)
When fitting large or divided furniture
doors an extra fitting kit or set of
fixing brackets should be used.
These are available to order from
Miele.
Installing the appliance
91