Filter
Top Products
Setting/altering the active charcoal
filter operating hours counter
The active charcoal filters are only
used for cooker hoods which are set
up for recirculation mode.
They are not
required for vented extraction.
On delivery the operating hours
counter for the active charcoal filters is
set to unlimited.
For recirculation mode the operating
hours counter needs to be set to the re-
quired time:
Press the On/Off touch control to
switch the fan off.
Press the run-on option touch control
and the active charcoal filter touch
control at the same time.
The indicator lamp above the active
charcoal filter touch control and one of
the lamps above the – /+ touch controls
will flash.
The – /+ touch control lamps show the
time which has been set:
1st lamp from left = 120 hours
2nd lamp from left = 180 hours
3rd lamp from left = 240 hours
4th lamp from left = unlimited
Use the – /+ touch controls to select
the desired time.
Confirm the procedure by pressing
the active charcoal filter touch con-
trol.
If the procedure is not confirmed
within 4 minutes of programming
the steps, the cooker hood will auto-
matically revert to the "old" data.
Operation
15