Filter
Top Products
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
To change the door hinging you will
need the following tools:
–
a cross-slotted screwdriver,
–
a screwdriver,
–
a selection of Torx screwdrivers,
–
a spanner.
Appliance door
^ Open the appliance door.
^
Remove covers a, b and c with a
screwdriver.
^
Loosen fixing screws d at the top
and the bottom slightly.
^
Slide the door outwards and lift it off
e.
^
Unscrew the fixing screws d
completely, and loosely screw them
in at the top and bottom on the
opposite side of the appliance f.
If you have put locking pins into the
hinges to stop the door opening too far:
^ Remove the locking pins from the top
of the hinges.
To remove the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^
Using a screwdriver, carefully push
tension spring a outwards.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
Changing the door hinging
37