Problem Possible cause Remedy
The “Intake/Drain” indi
-
cator light flashes, and
the program stops.
Before searching for the
problem:
–
Turn the program
selector to “Stop”.
–
Turn the dishwasher off
using the “On/Off”
button.
Not enough water is en
-
tering the machine.
–
Open the water valve
completely.
–
Check the intake filter
and clean if necessary,
see “Cleaning and
care”.
– Check the water level
and increase the intake
time if necessary, see
“Checking the water
level”.
Water remains in the
wash cabinet at the end
of a program.
– Clean the filter combi-
nation, see “Cleaning
and care”.
– Clean the drain pump
and the non-return
valve, see “Solving
problems”.
–
Remove any kinks in
the drain hose.
Problem solving
41