Filter
Top Products
Problem Possible cause Remedy
There are rust stains on
cutlery.
The salt reservoir cap
was not screwed on
properly.
Screw the cap on firmly.
The affected pieces are
not corrosion resistant.
There is no remedy.
Only purchase dish
-
washer safe cutlery.
The detergent dispenser
lid does not close prop
-
erly
Clogged detergent resi
-
due is blocking the catch.
Remove the residue.
Detergent residue is left
in the dispenser at the
end of a program
The dispenser was still
damp when detergent
was added.
Check that the dispenser
is dry before adding de
-
tergent.
Water remains in the
wash cabinet at the end
of a program
Before fixing the problem:
– Turn the program
selector to the “Stop”
position.
– Turn off the dishwasher
with the “On/Off” but-
ton.
The filter combination in
the wash cabinet is
clogged.
Clean the filter combina-
tion, see “Cleaning and
care”.
The drain pump and the
non-return valve may be
blocked.
Clean the drain pump
and non-return valve, see
“Solving problems”
The drain hose is kinked. Remove the kink.
Problem solving
46