Filter
Top Products
Problem Possible cause Remedy
Dishes are not clean
The spray arm jets are
blocked.
Clean the spray arms,
see “Cleaning and care”.
The filter combination in
the base of the wash cab
-
inet is not clean or is not
seated correctly.
This may cause the spray
arms to be blocked.
Clean and/or reseat the
filter combination cor
-
rectly.
Clean the spray arms,
see “Cleaning and care”.
The drain pump and
non-return valve may be
blocked.
Clean the drain pump
and the non-return valve,
see “Cleaning and care”.
Not enough water comes
into wash cabinet.
Check the water level and
the water intake time.
Tea or lipstick stains
were not completely re-
moved
The wash temperature of
the selected program was
too low.
Select a program with a
higher temperature.
The bleaching effect of
the detergent used was
too low.
Use detergent containing
chlorine.
White residue is visible
on cutlery and dishes,
clouding occurs on
glassware, film can be
wiped off.
Not enough rinse aid was
used.
Increase the rinse aid set-
ting, see “Before using for
the first time”.
The salt reservoir is
empty.
Add reactivation salt, see
“Before using for the first
time”.
The salt cap was not
screwed on correctly.
Reseat the salt cap and
make sure it is screwed
back on correctly.
Problem solving
44