Miele G 698 Dishwasher User Manual


 
^
Hang the fixing bracket into the slits
in the machine door outer panel.
^ Push the overhanging ends of the
templates under the facia panel.
^
Adjust the fixing bracket a:
The long holes in the machine outer
door must be aligned with the
matching markings on the template.
^
Mark the height of the top edge of
adjacent kitchen base unit doors on
the template b.
^
Take off the fixing bracket.
^
Lay the door front down with the rear
side facing upwards.
^ Lay the bracket on the rear side of
the door front and adjust so that:
the marks on the template for the
upper edge of the adjacent base unit
doors match the top edge of the
door front.
the fixing bracket must be the same
distance from the left and right hand
side edges of the door front.
^
Use strips of adhesive tape to hold
the bracket in this position.
Installing integrated "i" Dishwashers
15