Miele G 698 Dishwasher User Manual


 
The plinth facing has two cutting lines.
^
Screw the plinth facing on to the
brackets with the cutting lines
towards the top. Then pull the facing
out evenly to align it with plinth
facings on adjoining kitchen
cabinets.
If you have pulled the plinth facing
out too far you must not attempt to
push it back in. It will have to be
unscrewed and taken off. The spring
clips can then be pushed outwards
and the brackets pushed back in.
The facing can then be re-attached
and adjusted again.
Installing built-under "U" model dishwashers
34