Miele G 698 Dishwasher User Manual


 
Built-under "U" model
dishwashers
“U” model dishwashers are specially
designed for installing under a
continuous worktop.
The dishwasher is supplied with the
control panel already fitted.
The height of the dishwasher front
panel can be adjusted to match
those of neighbouring kitchen units.
The decor panel supplied with the
dishwasher can be taken out and
replaced with a panel to match the
rest of your kitchen.
A plinth facing to cover the plinth
area is supplied with the dishwasher.
The height of the plinth facing can be
adjusted to match the height of
adjacent plinths. The plinth return is
freely adjustable.
Instructions for installing the
dishwasher are described in the
following sections.
,
To ensure stability, "U" model
dishwashers must only be installed
under a continuous worktop which is
securely screwed to neighbouring
units.
,
The dishwasher must not be
installed under a hob. The high
radiant temperatures which are
sometimes generated by a hob
could damage the dishwasher.
,
On dishwashers with a drying
fan, moist air is expelled through the
vent outlet in the front of the machine
at the end of a programme. It
continues to be expelled for a
certain length of time, or until the
door is opened.
To prevent damaging surrounding
fittings (e. g. worktops with wood
edging) the fan running time can be
increased by 14 minutes (see the
Operating Instruction manual for the
dishwasher).
Installing built-under "U" model dishwashers
21