Miele G 698 Dishwasher User Manual


 
2.Building the dishwasher
into its niche
Connection to water and drainage
should be sited beside and not behind
the dishwasher for accessibility.
Connections are usually made in the
area under the sink. Many kitchen unit
manufacturers provide a cut-out in the
base of the sink base unit for hoses to
be fed through.
If the base unit has no opening and if
there is not an opening through the
plinth area for connections, one must
be cut.
,
There must be no electrical
sockets behind the dishwasher.
Danger of overheating and fire risk if
the dishwasher were to be pushed
up against a plug.
Dimensions: 60 x 110 mm.
Some of the following steps require
the dishwasher to be pulled forward
a little way out of the niche. The
plumbing and electrical points should
not be connected until you have
finished installing the dishwasher in its
niche.
Installing built-under "U" model dishwashers
24