Filter
Top Products
Note
^
Load the items to be washed so that
water can access all surfaces. This
ensures that they will be properly
cleaned.
^
Do not place items to be cleaned
inside other pieces where they may
be concealed.
^
Hollow vessels such as beakers,
measuring cylinders, flasks, etc.
should be inverted and placed in the
correct inserts so that water can flow
in and out unrestricted. A cover net
can be used to reduce the risk of
movement during the wash process.
^ Use a cover net (e.g. an A 2) or
mesh tray to secure small and/or
lightweight items to prevent them
from blocking the spray arms or
being caught in the magnetic strip on
the automatic mobile unit recognition
system.
^ Deep based items should be placed
at an angle to allow water run off
easily.
^
Tall, narrow pieces should be placed
in the center of the baskets. This
ensures good coverage of water.
^
Mobile units with an adapter must
engage correctly.
^
Engage inserts correctly into the
module carts.
^
The spray arms must not be blocked
by tall items or items which hang
down in their path. If necessary,
manually rotate the arms to test.
Select mobile units, baskets and
inserts appropriate for the
application.
Applications
20