Filter
Top Products
Mobile unit coding strip
15 different codes can be set. They are
assigned to program places 1 to 15.
Under "System function - Selector
switch organization" the matching
programs have to be put into the first
15 program places.
Prog.-
place
Bit 1 Bit 2 Bit 3 Bit 4 Bit 5
Parity-
Bit
-00000
1l000l
20l00l
3ll000
400l0l
5l0l00
60l l00
7lll0l
8000l l
9l00l0
100l0l0
11ll0l l
12 0 0 l l 0
13l0lll
140llll
15llll0
The coded total must be an even
number. Setting Bit 6 is not included in
this calculation.
If the coded total gives an odd number
the message CHECK MOBILE UNIT
RECOGNITION appears. If the mobile
unit code equals 0, the message NO
MOBILE UNIT RECOGNITION appears.
In both cases the program cannot be
started. The mobile unit recognition
must be re-set.
Setting mobile unit coding
To set or alter the coding of a mobile
unit with automatic recognition (AWK)
proceed as follows:
^ Unscrew the track with an AWK (allen
wrench) and remove it from the
retainer.
^
Remove the magnetic strip from the
track.
Automatic mobile unit recognition (AWK)
17