Filter
Top Products
,
All electrical work must be
carried out by a suitably qualified
electrician in accordance with local
and national safety regulations.
–
Installation, repairs and other work
by unqualified persons could be
dangerous. The manuafactuer can
not be held responsible for
unauthorized work.
–
The direction the motor spins
depends of the electrical connection
of the machine. Connect the
machine in-phase for clockwise
rotation.
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate.
The data plate is on the cover plate
behind the service panel of the unclean
side.
The wiring diagram is secured to the
inner side of the service panel.
The unit is convertible for steam or
electric heating. Hook-up requirements
are as follows: 208 V, 60 Hz, 3 phase,
30 Amps and rated load 10 KW.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
37