Filter
Top Products
Power switch
(With the "emergency cut-off function"
set to I-ON.)
When switching on, selecting or
changing the operating level there are
four operating levels available:
A = Fixed program / Programs with free
access
B = Free program selection
C = AWK – Automatic mobile unit
recognition (program selection via
mobile unit coding)
D = Programming / free program
selection / change code (see
"Programming manual")
Turning on
^ Open the water valves (if turned off).
^ Press the ON/OFF I-0 button.
In operating levels A, B and D the most
recently selected PROGRAM NAME
appears and in operating level C
"AUTOMATIC MOBILE UNIT
RECOGNITION" is displayed.
To change the operating level
^
Press 1 and 2 at the same time.
Operating levels A B C D will appear
in the display.
^
Select the operating level you want
using the 1 or 2 keys.
^
Press 6 to confirm selection.
^
Enter your code when requested by
the display.
The code is set by default to >0000<.
^
Press the "Start" button 6.
[0000] appears.
^ Enter numbers using the 4 and 3
keys.
^ Select number position with the 1 or
2 key.
^ To confirm code press 6.
If you enter it incorrectly: FALSE CODE,
ENTER AGAIN will appear in the
display.
^
Close the door.
Selecting or changing your own
code
The factory set code can be
changed (see "Programming Manual
- System function").
Code 1 for levels ABC
Code 2 for levels ABCD
Operation
27