Filter
Top Products
End of a program
Once the "Start" indicator goes out, and
the "Complete" indicator comes on, the
program has ended. You will see a 0 in
the middle of the display, and all other
indicators will show a running light.
A buzzer sounds for a maximum of
30 seconds by default.
To change the buzzer function, see
"Programming functions".
^
Use the "Display" button to view the
total running time or temperature of
the program.
Additional drying
If additional drying is required after the
end of a program, you can use the
"Drain" program with Drying (optional
function). This program runs for
approximately 1 min in addition to the
drying time selected.
Turning off
^
Press and release the I-0button.
Because of the electric door lock, the
door can only be opened if the I-0
button is pressed (see "Opening and
closing the door").
Use
32