Filter
Top Products
For future servicing, be sure to document any changes made to the factory
settings in the fields provided.
General information:
–
Program selector positions that have no assigned function are represented by a
bar ( - ) in the middle of the display.
–
To call up the programming level, use the f position.
The status E.. will appear in the display.
The following instructions apply to all programming functions:
To access the programming mode
^ Turn the program selector to f.
^ Turn off the machine.
^ Simultaneously press and hold the ß
and 6 buttons, while turning on the
machine by pressing the On-Off button.
The current program status P..
appears in the display. The Fill/Drain
indicator lights.
Saving to memory and exiting the programming mode
^
Press the 6 button.
SP appears in the display.
^
Press the 6 button again.
The change will now be stored in the
memory.
Exiting the programming mode without saving
^
Press the On-Off button to switch off
the machine.
The change is canceled.
Programming functions
36