Filter
Top Products
Please refer to the installation
diagram supplied with the machine.
,
Furniture and fittings installed
near the machine must be of a
commercial standard, able to
withstand the effects of steam.
Installation options
–
Free-standing
–
Slot-in, next to other machines or
furniture or in a suitable space. The
space must be at least 35
7
/
16
"
(90 cm) wide and 27
9
/
16
" (70 cm)
deep
– Undercounter
The machine can be installed under a
continuous counter top or sink drain.
The niche must be at least:
Width 35
7
/
16
" (90 cm)
Depth 29
7
/
16
" (75 cm)
Height 32
5
/
16
" (82 cm).
The labwasher can be built into a
recess of 32
5
/
16
" (82 cm) high by
removing the lab washer top.
Leveling the legs
Any unevenness in the floor can be
compensated for and the height of the
machine raised or lowered by adjusting
the four screw feet.
When the feet are screwed in, the
machine can be moved back and forth
on its rollers.
Positioning and securing the
machine
To ensure stability, the machine must
be aligned and screwed to the counter.
^ Open the door.
^
Secure the machine to the front edge
of the countertop using screws
through each of the 2 holes in the
front trim.
^
When not mounted undercounter,
floor mounting brackets must be used.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring units. This will hinder
ventilation to the circulation pump.
Installation
66