Filter
Top Products
Before using for the first time
^
Clean the appliance interior and all
accessories with lukewarm water and
a little washing-up liquid, and then
dry with a soft cloth.
^
Use the stopper supplied to plug the
defrosting outlet in the bottom of the
interior of the appliance.
Important: To ensure correct
functioning of the appliance, let it
stand for 1½ to 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Using a coin, turn the On/Off and
temperature selector dial in a
clockwise direction away from the "0"
position.
The higher the setting, the lower the
temperature in the appliance.
Forcing the dial beyond its range will
damage it. Turn it only as far as it
will go, then turn it back again.
The in-operation and the alarm
indicator lights will come on, and the
appliance will start cooling.
The alarm indicator light will go out
when the temperature in the freezer is
cold enough.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
^
Using a coin, turn the On/Off and
temperature selector dial in an
anti-clockwise direction back to the
"0" position.
All the indicator lights will go out and
the cooling system will switch off.
Cool pack
(depending on model)
To ensure that the cool pack freezes
through quickly, place it at the bottom
of the freezer in a corner against two of
the side walls.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
To save space, place the cool pack on
the freezer tray once it is frozen.
Switching on and off
13