Filter
Top Products
If the two operating modes are run for a
different length of time from each other,
a time must be entered for the tradi
-
tional oven function at the start of the
programme.
^
After selecting the temperature, press
the Enter touch control.
"0h:00" will appear in the data entry dis
-
play.
^ Use the "– /+" control to enter the ap-
propriate time for the traditional oven
function.
^
Then press the Start touch control.
The time selected will be accepted and
will appear in the selected settings dis
-
play.
The display will show the remaining
time for the longer function counting
down.
At the end of the time for the function
with the shorter duration an audible
tone will sound. That function will be
switched off automatically. The settings
will remain in the selected settings dis
-
play, however, until the end of the entire
programme.
Example:
A time of 5 minutes has been set for the
microwave and 10 minutes for the tradi
-
tional oven function.
10 minutes will be shown in the display
area after the programme has started.
The time will count down towards zero.
The appliance will operate both the mi-
crowave and traditional oven functions
for the first 5 minutes.
After 5 minutes an audible tone will
sound once and the system will auto-
matically switch the microwave off. The
appliance will now continue to operate
using only the traditional oven function.
Combination programmes
32