Filter
Top Products
Repairs to this appliance should
only be carried out by a suitably
qualified and competent service
technician approved by Miele. Un
-
authorised repairs could be danger
-
ous.
The following can be corrected without
calling the Miele Service Department:
What to do if . . . .
. . . the display area is dark
^ Check whether:
– the appliance is correctly plugged in,
– the mains fuse has blown (call the
Service Department),
– the time display had been switched
off (see Section on "Time of day dis-
play").
. . . nothing happens when a touch
control is pressed.
^
Check whether:
–
the indicator light for that control is lit
up,
–
the programme lock is activated (see
Section "Programme lock").
. . . a process will not start.
^
Check whether:
–
if operating in microwave mode the
appliance door is properly shut,
–
if operating in microwave mode a
power setting and time have been
entered,
–
if operating with a combination
programme, the following have been
entered: a power setting, a time for
the microwave mode,a time and a
temperature for the conventional
oven operating mode.
– if operating with an Automatic
programme the weight has been en-
tered.
. . . no operating noise is heard when
the appliance door is opened during
a cooking process in conventional
oven mode
This is not a fault.
If the door is opened during a cooking
process the door contact switch will
switch off the heating and depending
on the function chosen, the hot air fan.
. . . a noise is heard after a process
has finished
This is not a fault.
The cooling fan continues to run for a
short time. When the temperature has
fallen sufficiently the fan switches off
automatically.
If the door is opened during this run-on
time the fan is switched off. If the door
is then shut the fan will start again.
Problem solving guide
72