Filter
Top Products
Timer - use
Time of day – 24 hour display
When the colon in the time display:
– flashes:
Once the time has been entered it
proceeds in minute intervals.
– is on constantly:
Time of day has been halted and
can be entered or altered.
When the appliance is first con-
nected to the power supply, or after a
power cut “12:00” and the symbols
“f” and “)” flash in the display.
If a process has been pre-pro-
grammed, the time of day can not
be altered or cancelled.
To enter the time of day:
Press the buttons “f” und “)” at
the same time.
“12:00” will show constantly in the dis-
play.
Using the -/+ button enter the time of
day in hours : minutes.
It is not necessary to keep the buttons
“f” and “)” pressed in.
To alter the time of day
This is the same procedure as for set-
ting the time of day
Press buttons “f” and “)” at the
same time.
This halts the time of day.
Use the – /+ button to enter the new
time of day in hours : minutes.
To cancel the time of day display
Press the buttons “f” and “)”
twice in succession.
Pressed once, the time display colon
stays on constantly. Pressed twice the
display clears. The time of day con-
tinues to run unseen.
To bring back the visible time display
Press buttons “f” and “)”
together once.
2x
1x
27