Filter
Top Products
Installation instructions
For Australia and New Zealand only:
Remote installation of
underbench oven
To install a underbench-oven at “eye
level” a special accessory kit is re-
quired for connection to the hob.
This unit is obtainable from your Miele
dealer, or the Miele Spare Parts dept,
and consists of a 3.5 metre long con-
necting cable and an additional con-
nector box.
The cable should be in conduit ap-
proved by the electricity regulatory
bodies. Only a suitably competent
person should install the connect-
ing cable from the control unit to the
hob.
The underbench oven must be built
in within view of the hob.
72