Filter
Top Products
Timer - use
Checking and changing
times entered:
It is possible at any time to call up the
times entered. The corresponding but-
ton for the time to be checked or
changed has to be pressed.
If times are programmed for several
processes, each process can be seen
by pressing briefly more than once on
the relevant button.
The number of times to press the but-
ton depends on the number of pro-
gramme steps entered:
Press once and the time entered for the
oven appears.
Press twice and the time entered for
the front left hob zone appears. This is
indicated by the “*” symbol.
Press 3 times and the time entered for
the front right hob zone appears. This
is indicated by the symbol “#”.
To check
Press the button for the time to be
checked.
“f”
The start time of the cooking process is
displayed. This goes out as soon as
the process begins.
“g”
The display shows the duration of cook-
ing time, or the time left if the pro-
gramme has started.
“)”
The end of the cooking process is dis-
played.
To change
Press the corresponding button.
Use the – /+ button to enter the re-
quired time.
When the indicator light in the centre of
the – /+ button goes out, the newly se-
lected time is registered. The time of
day appears in the display.
Please note the following:
If a button is pressed, where the time
was not entered, but calculated auto-
matically by the system, the indicator
light in the centre of the – /+ button
does not come on.
This time cannot be altered.
32