Filter
Top Products
Electrical connection
ä
Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installations.
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The data plate gives the necessary
connection rating, which must be ac-
cording to national and local stand-
ards.
When contacting the Service Depart-
ment, please quote the voltage, model
and serial numbers given on the data
plate.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test certificates awarded . . . . . . . . . . .
. . . . . . . . Electrical SAfety, C-Tick Mark
Electrically suppressed acc. to . . . . . .
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044
Underbench oven
The underbench oven oven is suitable
for connection to an a.c. single phase
230 V, 50 Hz electricity supply.
The fuse rating is 32 amps with hob.
Possible combination
The underbench oven can only be
combined with a certain range of the
ceramic hobs.
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
69