Miele H 387-1 B KAT Oven User Manual


 
When cleaning the roof of the oven
wait until the grill element has
cooled down before lowering it, to
avoid the danger of burning.
Do not use force to pull it down as
this can cause the element to
break.
Only use the Miele roast probe
(core temperature probe) supplied
with this appliance. If a replacement is
necessary it can be obtained from the
Miele Spare Parts dept or a Miele spe
-
cialist dealer.
After using do not remove the roast
probe until the oven interior is cool.
When not in use do not leave the
roast probe in the oven, especially
when grilling. High temperatures would
damage it.
Do not use plastic containers. They
melt at high temperatures and
could damage the oven.
Do not heat up unopened tins or
jars of food in the oven, as pres
-
sure can build up and they may ex
-
plode. This could result in injury or
damage.
Do not push pots and pans around
on the oven floor as this could
damage the surface.
Do not lean or sit on an open oven
door, or place heavy items on it.
This could damage the appliance. Take
care in the region of the hinges. The
oven door can support a maximum load
of 12 kg.
Make sure that nothing gets
trapped between the door and the
oven.
Cover any food which is left in the
oven to be kept hot. This avoids
the food drying out. It also prevents
steam condensing and possibly lead
-
ing to moisture damage in the oven.
If food is left in the oven after cook-
ing, e.g. to take advantage of the
residual heat, turn the temperature se-
lector to the lowest setting. Leave the
function selector at the position set.
Do not switch the appliance off until the
food has been removed.
Moisture in the oven could lead to con-
densation forming on the control panel
and surrounding kitchen furniture and
drops of moisture collecting under the
worktop.
Condensation can:
- damage the housing unit / worktop.
- lead to moisture damage in the oven.
It could also result in deposits remain
-
ing in the catalyser, causing an un
-
pleasant smell to arise the next time the
appliance is switched on.
Warning and Safety instructions
13