Filter
Top Products
To remove the back panel
^ Use a size 7 screwdriver to loosen
the screws in the rear panel and re-
move the panel.
^ Check the fan and clean off any soil-
ing.
The oven must not be used without
the back panel fitted. This could
lead to injuries.
Reassemble in the reverse order, care
-
fully ensuring all parts are correctly in
place.
To lower the upper heating element
The oven heating elements must be
switched off and cool to avoid being
burnt.
^
Take out the runners.
^
Pull down on the fixing knob for the
element to release it.
^ Gently lower the element.
Do not use force to lower it, as this
could cause damage.
If the roof liner is dirty it can also be re-
moved for cleaning:
^
Hold the roof liner firmly and unscrew
the knurled knob.
^
Take out the roof liner.
Reassemble in the reverse order, care
-
fully ensuring all parts are correctly in
place.
Cleaning and care
64