Filter
Top Products
Using the oven
After selecting a cooking function
you can select a cooking time.
To enter a time you must keep the rele
-
vant timer button pressed in whilst op
-
erating the "-" or "+" button.
^
Press the relevant timer button.
The following will then light up
–
the relevant symbol in the clock/timer
display,
–
the indicator light between the "–"
and "+" buttons.
^ Whilst this light is on, you can
change the time with the "+" and
"–" buttons.
Each press of a button increases the
time you have in which to input the tem
-
perature.
The time set is saved as soon as the in
-
dicator light between the "+" and "–"
buttons has gone out.
Setting the clock
When the appliance is first connected
to the power supply, or after a power
cut "12:00" and the symbols "f" and
")" will flash in the display.
The time can only be entered when
the function selector is at "0".
^
Press the "f" and ")" buttons at
the same time.
^ Enter the time of day in hours and
minutes with the + or – button.
As soon as the time has been saved in
memory it will start counting down min-
ute by minute in the display. The colon
flashes.
^
The programmable functions 07 and
08 can be used to adjust the time
from winter to summer time and vice
versa (see section on "Altering oven
settings").
Using the clock / timer
33