Filter
Top Products
All electrical work should be under
-
taken by a competent person in
strict accordance with national and
local safety regulations.
The voltage and rated load are given
on the data plate, visible when the oven
door is open. Please ensure that these
match the household mains supply.
Please quote these data, and the model
and serial number when contacting the
Miele Service dept.
Connection of this appliance should be
made via a suitable isolator which com-
plies with national and local regulations,
and which is accessible after the appli-
ance has been built in.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test marks . . . . . . . . . . Electrical Safety
. . . . . . . . . . . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to. . . . . . . . . . . AS/NZS 1044
AUS
Wall oven
The wall oven is suitable for connection
to a single phase 240 V, 50 Hz electric
-
ity supply. The fuse rating is 16 A.
NZ
Wall oven
The wall oven is suitable for connection
to a single phase 230 V, 50 Hz electric
-
ity supply. The fuse rating is 16 A.
Electrical connection AUS, NZ
73